UV disinfection equipment use conditions

Water temperature: 5 ° C ~ 50 ° C;

Ambient temperature: -5 ° C ~ 50 ° C;

Relative humidity around: no more than 93% (at 25 °C)

Voltage: AC220V±10V, 50Hz

Working pressure: 0.6Mpa, it is strictly prohibited to exceed the rated working pressure

Sterilization of drinking water: 1cm UV transmittance (T254): 95%-100%; when the original water quality is lower than the drinking water standard in China (chromaticity is higher than 15 degrees, turbidity is higher than 5 degrees, including The amount of iron is higher than 0.3 mg / liter), and the corresponding measures should be used for pre-treatment to meet the conditions of use of the equipment.

Sterilization of culture water: fresh water and seawater filtered by sand filtration or other treatment.

Sewage: According to the sterilization requirements, the water quality of the disinfection equipment is 1cm (T254): ≥40%; other requirements meet the secondary standard of China's "Integrated Wastewater Discharge Standard" GB8978-1996.

Water that needs to be sterilized, if the water quality cannot meet the above requirements, should be subjected to appropriate pre-treatment, such as flocculation, sedimentation, filtration, etc., to remove various impurities in the water.